Super simple filament jam and presence sensor - Lever for ender endstop and M10 thread
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Agree this is the best implementation to use simple endstop switch to detect both filament runout or filament jam
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 31
- Makes
- 0
- Views
- 440
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Big thanks to Martin for this design. it solve my issue of filament jam due to the small hook at the end of each roll of filament.
This model is for ppl with ender endstop switch and M10 bowden thread.
it requires below hardware to assemble:
two M3x10 screws
two M3 nut
a spring from ball pen
I only upload the lever part, for the remaining part, please refer to
https://www.printables.com/model/58207-super-simple-filament-jam-and-presence-sensor/files
https://www.printables.com/model/275865-super-simple-filament-jam-and-presence-sensor-inli