1 / 5
Ducati multistrada 950 timing belt tension
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
helps to adjust the tension for that hard to reach roller behind the frame
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 96
- Makes
- 0
- Views
- 2,055
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- GNU General Public License v2.0
A jig to raise the nut to tension the timing belts on a ducati. Schould fit a metric size 30mm.
The small one (13mm) is to pre-tighten the smaller nut, especialy the one behind the frame that doesn't fit a socket wrench and hard to reach with the jig attached.
Only for pre tichtening, not to torque.
I printe upside down with support so that the inside was ‘clean’
I used android app "Spectroid" to measure the frequency.