1 / 1
Raspberry Pi 2 Display Box (Shadowbox)
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Wall-mounted
- License
- Creative Commons — Attribution — Noncommercial
You have to cut and engrave the glass by yourself. I used 1.2 mm photo glass for this.
To secure the lid, you need 4x M3 screws.
The wall mount variant is very customized for the wall in the picture, but you could also just screw trough the holes into a wall or so.