Belt Cleaner for Recreator 3D
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
PET1 tape cleaner allows a clean tape to be passed through the hotend during pulltrusion.
- Rating
- 0 / 5
- Likes
- 22
- Downloads
- 111
- Makes
- 0
- Views
- 1,144
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Belt Cleaner
Required material:
- 1 Screw M3x20
- 1 Nut M3 or 1 Insert M3 (depending on the model chosen).
- 8 cylindrical magnets 4x2mm
2 pieces of sponge:
- 51x21x25 for the bottom
- 51x21x8 for the top
I use sponges designed for polishing vehicles (see picture)
I usually prepare my bottles in batches in order to store them in strips.
Dust and cat hair like plastic, so this module allows you to clean the strip before inserting it into the hotend.
-------------------------------------------------------------------------------------------------------------
Matériel requis :
- 1 Vis M3x20
- 1 Ecrou M3 ou 1 Insert M3 (selon modèle choisi).
- 8 aimants cylindriques 4x2mm
2 morceaux d’éponge :
- 51x21x25 pour le bas
- 51x21x8 pour le haut
J'utilise des éponges destinées au polissage des véhicules (voir photo)
J'ai pour habitude de préparer mes bouteilles en lots afin de les stocker en bande.
La poussière et les poils de chat apprécient le plastique, c'est pourquoi ce module permet de nettoyer la bande avant son insertion dans la hotend.