1 / 1
Simple Workbench Ligth
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
This is a simple workbench light consisting of 3 printable pars.
As lamp a H4 LED car headlight bulb is used.
Print instructions
Should be printable in any material, I used PLA. 25% Infill.
I power it with my lab power supply, but you can use any 12V DC supply which has enough power. I soldered the wires directly to the bulb and have banana plugs on the other end.
I used M3 threaded inserts and M3 Screws to mount the parts together, A the hinge I used a M4 threaded insert and a fitting screw.