1 / 1
Petsafe tunnel extension
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An extension for the tunnel of Petsafe cat door for the 300 series manual cat flap.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 154
- Makes
- 0
- Views
- 690
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This tunnel extension overlaps by approx. 10mm with the existing tunnel. The .stl files are named after the length extension, e.g.: “Petsafe tunnel 15mm” makes your tunnel 15mm longer, and is 25mm high.
If you need a value in between, take the STL that is slightly too big and cut off the excess length in your slicer, or just stop your printer when the desired height is reached.