Loket 5
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution
A toy locomotive printed in several parts.
If you want multiple colours then print the files one by one.
You need two sets of wheel and axis and four hubs.
Printed in PLA, 0.2 mm layer height. Originally printed on the MK2 but I have included Gcode for the MK3.
No supports needed. The built in supports on the chassis can be snapped off either by hand or with pliers.
When you assemble it the hubs are pressfit into the wheels.
When you screw the axles together, depending on the tolerances of your printer, you might have to twist them back and forth a little to make the screws bottom out. The plastic is soft enough that it eventually seats itself.