Loket 4
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A printable toy locomotive in many parts. Assembly required.
- Rating
- 3 / 5
- Likes
- 7
- Downloads
- 33
- Makes
- 1
- Views
- 234
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Vehicles
- License
- Creative Commons — Attribution
A toy locomotive printed in many parts.
If you want multiple colours then print the files one by one.
You need to print multiple instances of the following parts:
- 2 Loket 4 Axle Inner
- 2 Loket 4 Axle Outer
- 4 Loket 4 Wheel
- 4 Loket 4 Hub
Printed in PLA, 0.2 mm layer height. Originally printed on the MK2 but I have included Gcode for the MK3.
Supports needed for the bottom part of the boiler. Please refer to the included .3mf file "Loket 4 Printing Orientation Suggestion. The built in supports on the chassis can be snapped off either by hand or with pliers.
When you assemble it the hubs are of a different thread size to the axles to make them seize up at the appropriate depth.
When you screw the locking screw and the chimney to the boiler, depending on the tolerances of your printer, you might have to twist them back and forth a little to make the screws bottom out. The plastic is soft enough that it eventually seats itself.
The cab slides onto the boilers mount and is twisted 90 degrees.