1 / 2
MX5 Miata Window Crank
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Window crank was broken and decided to make a custom one. It will slip right in, maybe with a bit of tight tolerances.
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 149
- Makes
- 0
- Views
- 999
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Automotive
- License
- Creative Commons — Attribution — Noncommercial
Made this simple crank handle to replace the OEM one in the mean time. I believe I used an M2.5 nut glued on to the “crank knob” and a bolt (may require a small washer depending on the type of bolt used) through the “crank handle”.
A few months in and its still holding!
Printed in ASA.