1 / 3
Stroker's 1/32 Slot Car scenery building side walls and interior brackets — image 1
1 / 3

Stroker's 1/32 Slot Car scenery building side walls and interior brackets

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Here are the inner brackets and mid floor and roof

Rating
0 / 5
Likes
6
Downloads
68
Makes
0
Views
910
Reviews
0

Updated at source:

Model information

Category
Other Ideas
License
Creative Commons — Attribution — Noncommercial

This is the roof, second  floor, side walls and necessary brackets to mount all of those items to the assembled front wall. 

The side walls are taller then the front wall. That is because the assembly is designed to mount at the edge of the track and this allows an overhang. If you want even walls you can simply cut them off after printing.

The second floor allows you to selectively light the model in different areas.

 

The 2 longest pieces are the roof and the second floor.

The 4 long flats are the side walls. 2 per side.

The long L brackets are for attaching the side walls and roof and floor to the front of the model.

The short L brackets are for corner reinforcements of the roof to sidewall and 2nd floor to sidewall and one at each side of the bottom side walls to stabilize the model.

Note: if you're not having the model overhang the edge of the track then you will need to shorten the side walls some with a hobby knife and straight edge. This is a custom overlap designed to straddle the curve border of the track. 

 

Tags