1 / 1
Remix of Bambu Labs X1 POOPY SHOE - added magnets (10*5 mm) — image 1

Remix of Bambu Labs X1 POOPY SHOE - added magnets (10*5 mm)

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Added holes for magnets, so it's easier to snap it in place in the blind, if the printer is placed up against a wall.

Rating
5 / 5
Likes
31
Downloads
322
Makes
3
Views
1,818
Reviews
2

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

Added holes for magnets, so it's easier to snap it in place in the blind, if the printer is placed up against a wall.

Also, I cut of a tiny bit of the curved edge where the heel meets the slope, to make it print nicer without supports there.

You could add a modifier to add support enforcers for the magnet holes - but it will probably be fine without.
I printed mine with support in the holes, and my 10*5 mm magnets fit in perfectly, didn't even need to use glue.

Should fit the Bambu Lab P1P as well.

Note: It can be a bit tricky to make it fit the build plate - position it like shown in the picture, then right click the model and choose “Center”, and it will fit.
Also, remember to disable brim!

 

Tags