Pod Walker
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Hi! This is another robot/mecha/walker ready to print in parts then assembled. Choose your favourite colour combo and…
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 69
- Makes
- 3
- Views
- 472
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Action Figures & Statues
- License
- Creative Commons — Attribution
Hi!
This is another robot/mecha/walker ready to print in parts then assembled.
Choose your favourite colour combo and print!!
Using the same pilot that i made for 'Tow Walker' (https://www.thingiverse.com/thing:2893106)
Tolerances around 0.2 mms so you shouldn't need sanding. If some parts comes loose when assembling my best tip is using a bit of tape (see below) to made a strong fit.
I could print at 50% (in 5 hours) and it works!!
Include a full-plate.stl with all the parts ready to print-in-place (fits in a 18x18 cms plate). Also there's 2 files 'full-color1.stl and full-color2.stl with the parts i've print in diferent colors
Just in case i included a 'robot.stl' with the full figure in a piece.
NO SUPPORTS NEEDED!!! :D
Hope you like it.
Have fun!!
Using tape for a good fit
if some parts comes loose, use a bit of tape to make a good fit
Full plates ===========All the pieces
My first color selection parts
My second color selection parts
Category: Model Robots