1 / 9

The Roadrunner

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Hi! Playing with sculptris i made this!! I call it 'The Roadrunner', it's a guy and his monocycle. Figure in pictures…

Updated at source: Feb 6, 2023

Model information

Hi!

Playing with sculptris i made this!!

I call it 'The Roadrunner', it's a guy and his monocycle.

Figure in pictures is printed at 2x scale. Also i made some test at 75% and it can print well.

I used my favourite combo of Fillamentum PLA (Vertigo grey + Iceland Blue + Gold Happens) for the figure in photos.

See Print settings section for more info.

Hope you like it.

Have fun!!!

Printer:

Creality CR 10

Rafts:

Supports:

Yes

Resolution:

Infill:

Doesnt matter

Notes:

Main figure is printed with 0% infill, 3 walls/perimeters, 3 bottoms and 4 top layers.

Supports required, i reoriented the STL as i printed but feel free to find a better position or orientation in your slicer.

You may need sanding to put the 'flames' into figure so i recommend using a -0.2 horizontal expansion and use some glue if aome parts are loose

200% size, 0.2 layers, 0% infill and a bunch of supports but fantastic results.

Category: Models