Corner Protection Low Profile
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.39 – €0.48 net (excluding VAT)
For file: Corner Protection Low Profile.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.43 excluding VAT (range midpoint).
- Weight reported by the author
- 4 g
- Print time reported by the author
- 30 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A corner protection with reduced height
- Rating
- 5 / 5
- Likes
- 21
- Downloads
- 124
- Makes
- 2
- Views
- 424
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
I searched the internet for a corner protector that I can also use for a small cabinet with drawers.
Unfortunately I didn't find anything useful, all the products were too high and would have blocked the drawer.
So I created a "flat" corner protection here with a height of 15mm (inside).
The protection can best be printed upside down without support and then simply attached with double-sided adhesive tape.
I hope this can help others with the same problem.