1 / 4
Pokeball Foaming Soap Dispenser
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Extra needed Foaming soap pump Tested pumps Balea Isana Palmolive Sagrotan Schmutzfink You can test your pump with the…
- Rating
- 5 / 5
- Likes
- 118
- Downloads
- 304
- Makes
- 3
- Views
- 3,573
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Extra needed
- Foaming soap pump
Tested pumps
- Balea
- Isana
- Palmolive
- Sagrotan
- Schmutzfink
You can test your pump with the "Thread test.stl" before printing the complete soap container.
Spacer
If the pump is not centered, this can be corrected with the spacers. Print out the different variants and test until it fits.
Print instructions
To get the soap container watertight
- Perimeters: 6 (2.4 mm)
- Top layers: 5
- Bottom layers: 3
- Layer height: 0.2 mm
- Infill: 10%
- Seam position: Random
Top and bottom shell
- Perimeters: 2 (0.8 mm)
- Top layers: 4
- Bottom layers: 3
- Layer height: 0.2 mm
- Infill: 10%
- Seam position: Rear
Post-Printing
- Glue parts together
- Insert soap
- Insert pump, the tube may have to be shortened