VESA 200x200 Mount for Horizontally Oriented 3/4 Iron Pipe
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a mount made for a VESA 200x200 TV that will attach it to a 3/4 iron pipe oriented horizontally.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 31
- Makes
- 0
- Views
- 475
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution — Share Alike
NOTE: Adjust the orientation for easier printing and strength.
This is a mount made for a VESA 200x200 TV that will attach it to a 3/4 iron pipe oriented horizontally. Steeltek fittings were used to attach the piping together for mounting. The VESA mount uses M8 size screws to secure it to the TV or monitor. A 12in ¼-20 threaded rod, 4 washers, and 4 nuts are used to attach the pipe clamp to the mount. The pipe clamp is secured to the pipe using four ¼ -20 bolts and nuts that are 1 inch long (shorter may also work). Print two copies of the pipe clamp. Force will be required to push the pipe clamp onto the mount to get it past the detents.
Print Settings:
- Material: PETG
- Infill: 50%
- Walls: 5
- Top and Bottom Layers: 4
Summary of hardware required:
- 4 x M8 bolts sized for your TV or monitor
- 1 x 12 inch long ¼-20 threaded rod
- 4 x ¼ inch fender washers,
- 8 x ¼-20 inch nuts
- 4 x 1 inch long ¼-20 bolts