1 / 7
Heart Lockette Buckle Box
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Cute valentine's box with a heart shaped buckle. Perfect for holding a gift inside for someone :D
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 78
- Makes
- 1
- Views
- 541
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Public Domain
Print Settings(I use a flashforge Adventurer 3 pro):
Lockette Box: 7 hrs
This part must be printed on its side so that the hinge faces upwards and the heart hole faces sideways. The hinge requres a tolerance of 1mm or better. Make sure to support the bottom part of the hinge so that it doesn't print mid-air. After removing brims and supports, the box should open and close on its own.
- Layer height: 0.25mm
- Print speed: 60mm/s - 80mm/s
- Travel speed: 70mm/s - 80mm/s
- Shell count: 2
- 0% infill
- Use Supports only for the bottom part of the hinge
- NO RAFT
- BRIM SUGGESTED
Buckle: 1.5 hrs
- Layer height: 0.12mm - 0.15mm
- Print speed: 40mm/s - 50mm/s
- Travel speed: 60mm/s - 70mm/s
- Shell count: 2
- 15% infill
- NO SUPPORTS
- NO RAFT
- Brim is optional
Screw Cap: 20 mins per cap
- Same settings as buckle
- Print 3 of them