Yoyo Dispenser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Like a soda can dispenser but for dispensing yoyos! Fits up to 10 at a time.
- Rating
- 5 / 5
- Likes
- 29
- Downloads
- 61
- Makes
- 1
- Views
- 1,456
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Indoor Sports
- License
- Creative Commons — Attribution — Noncommercial
With a big collection of yoyos I wanted to make sure I play all of them every once and again but got tired of having to manually dig them out from the drawer to make sure they all got some love. I got inspired by those fridge dispensers for soda cans and designed one that works the same way for yoyos.
It fits up to 10 yoyos with a width up to 48 mm and a diameter of 60 mm which should be enough for most standard yoyos.
To put it together you need to print:
- First_Pillar x1
- First_Pillar_Mirrored x1
- Second_Pillar x1
- Second_Pillar_Mirrored x1
- Back x1
- Back_Mirrored x1
- Top_Rail x1
- Top_Rail_Mirrored x1
- Bottom_Rail x1
- Bottom_Rail_Mirrored x1
- Connector x6
You will need to print with support enabled.
It was designed with quite big tolerances to accommodate a 0.8 mm nozzle diameter.
Use a dab of glue where each part meets another to make sure they stay together.
It has been designed to fit a 250 x 210 mm bed (Prusa Mk3s), anything smaller won't fit the Bottom_Rail parts.