Bambu Labs extended Poop Chute magnetic with 45° extension.
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
So the poop drops to a bucket underneath the printer on a IKEA KALLAX Shelving unit
- Rating
- 5 / 5
- Likes
- 132
- Downloads
- 693
- Makes
- 14
- Views
- 8,935
- Reviews
- 10
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
I have my X1 Carbon on a IKEA KALLAX Shelving unit that is 5 cm from the wall. When the printer poops it drops it in between the wall and the KALLAX. The poop then bounces into a large container Underneath the printer.
The Bambu Long Drop Poop Chute by EvilSpyBoy was almost what I wanted. It only glued the 45° extension to the chute and that would not do.
If I move the printer I need to be able to remove the extension so It does not break. So I added a way to connect the 2 parts with 6x3 magnets and redesigned the chute to use 10x3 magnets and both to be printed without supports
I have added a chute without the connection points if you don't want the 45° extender.
You need 8x 10x3 magnets and 8x 6x3 magnets.
I used a little drop of superglue to fix the magnets in place.
No Supports needed. I printed in PETg using the 0.2 layer height standard profile in Bambu Studio.
Here is a link to the model on Tinkercad:
https://www.tinkercad.com/things/hYazcfS6KFZ