1 / 2
Ramrod tip for 12 Gauge shotgun cleaning patch
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Suitable for M5 internal thread ramrods. Use with 12 gauge felt cleaning patches.
- Rating
- 0 / 5
- Likes
- 16
- Downloads
- 97
- Makes
- 0
- Views
- 622
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Application
- Suitable for M5 internal thread ramrods (e.g. StilCrin and similar).
- Use with 12 gauge felt cleaning patches (e.g. from "ЧистоGUN”).
- Normally passes through full choke (1mm)
Making
- print (tested with PLA, 0.2mm layer, 0.3mm nozzle)
- insert central stick into tip's hole. A part of wooden toothpick works fine. A small bit of 1.75mm filament will also do.
- two models attached have 2mm and 2.5mm central hole diameter whichever fits the selected central stick
Use
- put the tip onto ramrod, attach the felt cleaning patch, apply some oil if needed and clean the barrels.