1 / 2
STM32 Nucleo mounting base with breadboard
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounting plate for STM32 Nucleo, with room for an optional breadboard. Can be affixed to aluminum extrusion such as 2020
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 86
- Makes
- 0
- Views
- 1,052
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I found plenty of mounts for Arduinos and PIs, but nothing for the STM32 Nucleo. So I made this. My board is the STM32-F446RE. It mounts to the 3 standoffs with M2 20mm bolts (18mm will probably do).
There is space for a small breadboard, the common size small board will press fit nicely, but you can also use the sticker on the bottom of the board to affix it in place.
Two mounting holes accept M5 bolts for affixing to a base such as 2020 extrusion.