Flippy Friendly Butterfly Knife Balisong Trainer {NO SCREWS NEEDED!}
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.59 – €4.39 net (excluding VAT)
For file: ONLYPRINTWITHSOVOLSV06.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.99 excluding VAT (range midpoint).
- Weight reported by the author
- 31 g
- Print time reported by the author
- 5 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A friendly butterfly knife trainer to use in public
- Rating
- 4.563 / 5
- Likes
- 250
- Downloads
- 5,335
- Makes
- 21
- Views
- 16,681
- Reviews
- 16
Updated at source:
Model information
- Source
- Printables
- Category
- Other Gadgets
- License
- Creative Commons — Attribution
BEST PRINTED WITH PETG
I modelled this in Blender while making sure it can function when printed.
All you need is glue to glue the two hinge parts together while inside the handle and blade.
It should take around 4-5 hours for 100% infill at 60 mm/s speed and .2 mm layer height
I also recommend you print this facing upward for the best quality. Make sure you are using a raft if you don't have the best bed adhesion
I left room inside the handles for foam or any other dampening material.
This is heavily inspired by Squid industries “Squiddy” and Glidrs “Arctic” balisong trainers.