Box for LCR-T3 Graphical Multi-function Tester
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Since I did not manage to find an existing print which fit my LCR-T3, I created mine.
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 90
- Makes
- 1
- Views
- 547
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Since I did not manage to find an existing print which fit my LCR-T3, I created mine.
I used 3 M3x5 screws to secure the tester, and a M3x12 screw to create the thread in each hole. Due to poor board layout, a fourth screw cannot be used. Note that spacing could be improved, to better center the button, or adjust the size of some cuts.
Model displayed in photos is printed with a basic PLA (not so great), with 0.3mm setting, 20% infill, 3 perimeters and thin walls detection.
Reference of the LCR-T3 tester : https://www.aliexpress.com/item/1908731704.html
Inspiration : https://www.prusaprinters.org/prints/34496-lcr-t3-component-tester-enclosure