Customizable Purge Trash Bin for Bambu Lab printers
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a 100% customizable bin for the Bambu Lab P1P, X1 and X1 Carbon 3D printers.
- Rating
- 4.923 / 5
- Likes
- 123
- Downloads
- 2,363
- Makes
- 15
- Views
- 8,744
- Reviews
- 13
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
This object is a bin for the Bambu Lab X1 and X1 Carbon 3D printer.
It is positioned at the rear, on the left side of the printer and follows the outline of the printer.
It allows you to collect the waste ejected by the printer at the back and stores them on the side so that you can see when it needs to be emptied.
Here is two variations (STL file): Large and Small format that can be printed respectively in 10h or 5h.
You will also find the Fusion 360 file with all dimensions set as editable parameters. You'll be able to change the heights of the object, or the width of the slope and even the thickness of the walls.
No support, no brim, no raft needed. Just slice and print!