1 / 5
Elegoo Neptune 3 Pro display mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Display mount adapter for left side mount on Elegoo Neptune 3 Pro.
- Rating
- 5 / 5
- Likes
- 92
- Downloads
- 432
- Makes
- 2
- Views
- 5,058
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
I needed to place the display of my Elegoo Neptune 3 Pro on the left side. Therefore, I drew an adapter for the original mount. I printed it out of black PLA.
Required Parts:
- 6 pcs M4 nut
- 3 pcs M4x10 screws
- 3 pcs original M4 screws
Assembly:
- Push 3 pcs M4 nuts into the hexagonal holes on the adapter.
- Screw the adapter onto the aluminum profile of the 3D printer using suitable stones. I used only M4 nuts. It is completely sufficient.
- Screw the cover and mount to the adapter using the original screws.
- You can use the cover with the USB stick holder.