Housing Box for the QRPLabs Dummy Load project
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This box is designed to house the 20W Dummy Load , widely used by the Ham Radio operators.
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 81
- Makes
- 2
- Views
- 477
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
The filament used is Devil Design PETG. It’s printed on the Prusa Mini.
This box is tailor made for the QRPLabs 20W Dummy Load project PCB. The bigger hole in the box is to accommodate snugly the supplied BNC connector, two smaller holes are made 6mm diameter each in order to accommodate the 2mm Banana plug sockets. It is recommended to round off the sharp edges on the BNC side of the PCB in order to guaranty a snug fit of the whole assembly into the box.
The video featuring this project could be found on my You Tube channel “LY2H Ham Radio Van” , or under the handle @Linas_LY2H .
Happy printing/using!
73! Linas LY2H