Tiny PCB workstation
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
I made this because I couldn't find a smaller version of the base frame that fit my print bed. I also didn't need it....
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 39
- Makes
- 1
- Views
- 595
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
I made this because I couldn't find a smaller version of the base frame that fit my print bed. I also didn't need it to be massive like the original and a faster print time.
This works for me with the same acupuncture needle probes and I've been able to flash a few Tuya chips this way.
The vice is made by mdkendall and the link is https://www.printables.com/model/133490-2inch-desktop-vise
The probe and the probe stands are made by giufini and the link is https://www.printables.com/model/351270-pcb-workstation-with-nano-probes
I would suggest trying out the needle probe with no support and adjustment knob made by blinkybill and the link is https://www.thingiverse.com/thing:4592185/files
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/5vNeCkHPFUT-small-pcb-holder/edit?sharecode=V73HihkRphiBYyvMsAfRpy2Cu4twX9f9VhLQdm2tAD4
.
Print Settings
Printer Brand:
Dremel Digilab
Printer:
3D20
Rafts:
Yes
Supports:
Yes
Resolution:
100
Infill:
20
Filament: inland PLA grey
Notes:
I'm still dialing the printer in but these worked well.
Post-Printing =============
I'm going to assume your printer is better than mine and if the holes are a little bigger than expected, a little electrical tape or any tape around the stem will help.
I did have to sand the vertical stem of the crane to fit the crane base with handle.
How I Designed This
This object was made in Tinkercad. Edit it online https://www.tinkercad.com/things/5vNeCkHPFUTA
Category: Electronics