Big Foldable Mask Case
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€3.77 – €4.61 net (excluding VAT)
For file: bigfoldablemaskcase_015mm_petg_mk3s_4h30m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.19 excluding VAT (range midpoint).
- Weight reported by the author
- 49 g
- Print time reported by the author
- 4.51 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
imakina created a really elegant design for holding a mask, but my wife found it a bit small for her cloth masks.
- Rating
- 5 / 5
- Likes
- 36
- Downloads
- 285
- Makes
- 3
- Views
- 1,117
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Home Medical Tools
- License
- Creative Commons — Attribution
imakina created a really elegant design for holding a mask, but my wife found it a bit small for her cloth masks. I re-created the design from scratch in Fusion 360, using a lot of imakina's awesome ideas.
I also reused the pin he designed as a component, because I liked that design. Make sure you insert the clip into the correct hole. If you feel the inside with a small screwdriver or pair of tweezers, the "permanent" side has ledges on the interior, while the clip side is smooth. You shouldn't need glue if you insert the clip properly and push it down and expand it.
The second pic shows a comparison of two of the bigger cases against an original one, and the third pic shows the differences in thickness.
The Fusion 360 design timeline can be used to make changes, but it's not totally parametric. Especially seeing the folding wedge's heights and lengths have to be played with in the drawing. It's possible to make it totally parametric as the timeline is totally clean, but I just don't see it being worth the effort.
The 3mf file has a hidden case that uses 3 layers for the fold, as opposed to two. It's a lot stiffer though. No supports are needed for the print, just like the original.