1 / 4
Tilt-able Camera in a 50mm Enclosure
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Mounts for a servo and camera in a 50mm cylindrical enclosure. Gcode only :(
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 11
- Makes
- 0
- Views
- 488
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Photo & Video
- License
- Creative Commons — Attribution
A mounting system for a tilt-able secondary camera on a mini ROV. Can be used for inspecting the bottom of piers and docks, and for looking back at the tether during a dive.
I have unfortunately lost the source CAD files, so only have the gcode and the photos and screenshots I took at the time.
Designed to be used with:
- 50mm Cast Acrylic Enclosure
- length: 100mm (longer lengths should also work)
- dome end-cap shown in photo is not necessary
- Low-Light HD USB Camera
- use a shielded cable to avoid signal degradation from electrical noise
- HS-5055MG (like used in this Camera Tilt System)
- has close to 180° of movement
Camera feed can be streamed to the topside via a Raspberry Pi running BlueOS.
Originally printed on an eMotion Tech MicroDelta Rework.