Geodesic straw dome incl. lamp adapter and f3d files
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.66 – €0.81 net (excluding VAT)
For file: 5legs-4x_0.6n_0.2mm_PLA_MINI_44m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.73 excluding VAT (range midpoint).
- Weight reported by the author
- 9 g
- Print time reported by the author
- 44.4 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Geodesic straw dome incl. lamp adapter and f3d files
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 101
- Makes
- 0
- Views
- 965
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Sculptures
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Build a dome with straws and these connectors. You can turn your dome into a lamp with the optional adapter.
Parts
- Hemisphere: 10 six-leg connectors, 6 five-leg connectors, 10 four-leg connectors, 35 long straws, and 30 short straws.
- Sphere: 30 six-leg connectors, 12 five-leg connectors, 0 four-leg connectors, 60 long straws, and 60 short straws.
- Lamp adapter: same as above minus one five-leg connector and plus the lamp adapter.
Straw length
The straw length can be calculated with any online calculator, e.g. http://www.domerama.com/calculators/2v-geodesic-dome-calculator/, and deducting 10 mm for each straw. For example, to make the most out of 20 cm straws for a diameter of 68 cm use the full 20 cm for the long straws and 17,6 cm for the shorter straws.
Printing
For the perfect fit try multiple scale factors first before batch printing (e.g. 98%, 100%, and 102%; 105% worked best for my straws). The connectors print well without supports at 0.2 mm layer height, 2 perimeters, no infill, and a 10 mm brim (easy to remove; brim can also be left on the connector to hide the outside of the connectors). For batch printing, the adapters “complete individual objects” might be useful. Use heat-resistant filament for the part that interfaces the light bulb.
Bonus tip: If you are building a lamp, print the connectors using glow-in-the-dark filament.
Optional Details
These connectors are designed for a 2-frequency geodesic dome. The angles for the connectors are 18° for the 5-leg connectors and 15.9° for the six-/four-leg connectors. The lamp adapter has an inner diameter of 46 mm. All these values can be easily modified in the f3d files included below.