The Sausage Keycap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A sausage to put on your fancy keyboard!
- Rating
- 5 / 5
- Likes
- 116
- Downloads
- 772
- Makes
- 3
- Views
- 2,229
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
The Sausage Keycap is an FDM-printable, Cherry MX-switch-compatible, comically-proportioned sausage that you can put on your keyboard.
The profile is based on the DSA profile, but it doesn't look out-of-place when taking the place of a R4 cherry profile keycap.
The stem is raised a bit to allow the keycap to sit lower on the switch. This also means that small support segments are needed. If using PrusaSlicer, it's easy to use the “Paint-on supports” option and smart fill the stem's two bottom faces.
The pictured prints were printed on an Ender 3 S1 Pro with PLA:
- Layer height: 0.12mm (first layer @ 0.2mm)
- 2 perimeters
- Infill: 100% (lower should work fine, but a larger infill makes it feel more solid)
- Supports needed for the stem
- No need for a brim or raft
EDIT (27-May-2023): Added STL and STEP files for the sausage alone