Hanging Dryer for Small Stuff

This design is heavyly inspired in a comercial product that my wife adores. So…if the other product is so good why did I make a 3d print version, you may ask…

The main reason is replacing broken parts, mainly the pegs. I tried to create a peg version to replace the broken ones but I was never satisfied with the solution so… I did the hole thing by myself.

I'm still not completly happy, but I'm happy enough (and also is my wife) to release it to the public.

Also a small big detail, for the peg I used a wonderfull design by Tvorim3D. Please download it from this link ( https://www.printables.com/model/46765-clothes-peg-kolicek-na-pradlo ) and don't forget to give him some love.

So that's it now for the printing instructions:

Material: PTEG

Layer Height: .2

Infill: 15% except rings (100%)

Supports: No

Change filament during print: Only if touy heart desires

Brim: No (use if you need)

Raft: No

All models are print ready oriented.

Glue: Yes, in the pins and in the peg rings.

Assemble Instructions:

1: Insert the Rings in the arms

Insert the rings in the arm and glue the connection. The ring opens like showed in the image bellow:

2: Pins and Arms

Insert the Pins in the main body with the arm in it. It requires some pacience but is doable.

Put some glue in the connection between the pin and the main body.

The arm should be oriented with the hole facing down.

3: Insert the hanger

You might need to apply some force to insert it. You need to put the object aligned with the main body, insert the tip and then rotate. 

4: Insert the pegs

And that's it!

Ps: If you like this model and want to support me in a simple way, like, download and share this model with your friends.