E-Stop Key Cap
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here is a key cap that looks like an E-stop button. I modeled it for TTC mechanical switches but MX works too!
- Rating
- 4.927 / 5
- Likes
- 1,535
- Downloads
- 2,465
- Makes
- 51
- Views
- 21,649
- Reviews
- 41
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Here is an E-stop key cap
I printed mine out of PETG though PLA is probably okay.
No Supports for any of the components needed
I printed my parts at 0.2 layers with a 0.4 nozzle. If you want finer detail you can try a smaller nozzle diameter.
You will probably need to glue the mushroom part of the button onto the base.
I have provided two base models, one with a small amount of support that would need to be cut off after its printed and the other without support. I printed the no support version without issue but if you have issues with the middle piece detaching from the build plate I would try the base with support.
Happy printing and thank you for the support!