First Layer calibration Matrix
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a Calibration Matrix for the Prusa Mini to calibrate the first layer.
- Rating
- 4.81 / 5
- Likes
- 131
- Downloads
- 3,798
- Makes
- 11
- Views
- 9,764
- Reviews
- 21
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Public Domain
This is a Calibration Matrix for the Prusa Mini to calibrate the first layer. It consists of 15x15mm squares that are 0.2mm tall.
The Squares are layed out into a 4x4 Matrix and are printed sequentially starting form the front on the right.
You can create the G-Code for the Filament that you want to calibrate and start the print. Using the external perimeter you can start to do the rough calibration with the Live-Z tuning option.
Then you can adjust the Live-Z values while it prints the individual squares and check that square visually and with your finger after it starts to print the next one.