1 / 2
Kaffelogic RPI Zero Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a small remix to allow a Raspberry PI Zero to be mounted on the Kaffelogic Coffee Roaster
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 348
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
This is a small modification to allow mounting of a raspberry PI zero onto the Kaffelogic Coffee roaster chassis.
Printed with 0.2 layer height using normal PLA
Depending on your model of the KL machine you will need either the 111mm version or 114mm version. Measure the distance between the screws first.
The original screws are long enough so you can use the same