1 / 6
BambuLabs P1P light bar
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of WagZ remix. More pronounced PCB clips, better fitment of PCB connector, Zip Tie holes to fasten case.
- Rating
- 4.5 / 5
- Likes
- 15
- Downloads
- 126
- Makes
- 1
- Views
- 1,362
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Public Domain
This is a humble remix of WagZ's remix. The fitment for the PCB connector is better, the PCB retainers are more prominent so the PCB snaps in. Rather than printed clips there are holes to accept a zip tie. I found the clips could break even when using PETG or rattled when printing with higher temps.
Three versions;
- Left side - downward facing
- Left side shining straight across
- Front to back facing model (I have found this one personally preferable so the lights are shining on the print evenly. This model accommodates the wires entering so there is actually an excess in the length of the power wires. It can be easily coiled neatly out of the way.
1 & 2 are traditional left side mounting but using zip ties (see pic) or bonding tape. 3 must use bonding tape.