TP-Link TL-SG108E Mount for Leviton Structured Media Center
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A simple bracket to mount a TP-Link TL-SG108E 8 port switch in a Leviton structured media center.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 99
- Makes
- 1
- Views
- 1,105
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
A simple bracket that can be used to mount a TP-Link TL-SG108E 8 port switch in a Leviton structured media center. Requires 2 47615-NYL mounting pins and two #8 pan head screws. The #8 screws are 110mm apart so this may be usable with other equipment with similar mounting screw spacing.
Print Settings
Printer Brand:
Creality
Printer:
Ender 3 Pro
Rafts:
No
Supports:
No
Resolution:
.2mm
Infill:
20%
Filament: 3dSolutech PLA Black
Notes:
I used 3 walls for this to give plenty of material for the #8 screws to bit into. Depending on printing tolerances these holes may need to be drilled out a little
Category: Organization