1 / 1
Ergotron monitor riser
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Adds an extra 70mm of height to your Ergotron Workfit S for all you tall folks!
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 370
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial
A riser to increase the total height of your Ergotron Workfit S without spending the $100 for the official kit.
There are two different heights attached in the files section.
The section that feeds through the monitor adaptors is thin, so ensure that you print with a sufficient number of perimeters.
PETG or better is recomended due to the bending moment applied by the monitors.
The hole in the part is sized for a ¼-20 tap drill so you can add a retaining screw to prevent the monitors from sliding on the cross member.