1 / 9
6 Bay ITX NAS
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Slimed down version of my previous 12 Bay design, with ITX Motherboard and 6 Slot for 3.5 HDD
- Rating
- 5 / 5
- Likes
- 294
- Downloads
- 1,600
- Makes
- 3
- Views
- 19,452
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Require at least 260 x 260 mm bed, as the case are printed in 1 main pieces. hardware required:
- 1x ITX Motherboard with at least 6 port SATA
- 6x SATA and Power Combined Cable
- 1x FlexATX Power Supply
- 2x Slim 12cm Fan (and its Fan guard so the cable does not hit the fan blades)
- 26x m3 Screw - 6mm
- 26x m3 Brass Insert
- 1x Power switch - Round 16mm diameter
- Require about 1.2 - 1.5 KG of Filament depending on your setting
Tools Required:
- Soldering Iron to insert the brass insert for screws
- Hot Glue Gun to glue the SATA Cable for the backplane