Prusa Mini Gaming Edition: Slot Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Want to make your Mini fit your gaming setup?
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 58
- Makes
- 3
- Views
- 1,313
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
Want to make your Mini fit your gaming setup? Than this is the right print for you: Cover up the slots in the aluminium extrusions and put some LED-stips over it to make it shine.
What you need:
-Slot covers in the lenth of the aluminium extrusions
-RGB-LED-strips
-Power Supply and controler for LED-strips (often included when buying strips)
-probably some splitter cables
What you do:
-Print the slot covers (the model has a length of 50mm; you need ~250mm for each y-axis or z-axis slot)
-Put the covers into the slots
-Put LED-strips over it
-Connect the stips to the controller
-Connect the powersupply
Note:
You can also use these covers just to cover the slots to reduce debree in them.
If the covers are visible, I suggest printing them in black or orange, to match the colours of the printer.
Warning:
Do not cover up the hole slot if you ever want to remove the covers again! (I recommend a gap on one side of at least 10mm)
I appologise for my paint skills.