1 / 6
Spiral rose with stem, all in one
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
One piece print with second color by layer swap
- Rating
- 4.769 / 5
- Likes
- 115
- Downloads
- 798
- Makes
- 15
- Views
- 2,933
- Reviews
- 13
Updated at source:
Model information
- Source
- Printables
- Category
- Home Decor
- License
- Creative Commons — Public Domain
Hello,
This is a remixed single piece print model to save an assembly.
Design greatness belongs to Lytta & RubixDragon ( original models linked below ).
This is a classic print, not vase mode.
You must ensure great adhesion on bedplate, 3Dlac stick helps if filament not sticky enough.
How to get best print settings from 3MF file with PrusaSlicer 2.5.2 :
- Load 3MF ( prefer it from the STL )
- Infill tab :
- Infill 0%
- Layers and perimeters tab :
- Layer height : 0.2
- Perimeter : 1
- Horizontal shells / Solid layers / Bottom : 0
- Quality / Ensure vertical thickness : off ( better aspect with transparent filaments )
- Seam position : nearest
- Print & enjoy ;)
Update version v2 :
- updated infill in bottom of stem ( for less vibration )
- PETG & PLA printing Gcodes
- MK3S+ & MK4 Gcodes
Trials successful with several types of filaments :
- PLA classic, PLA matte, PLA clear, PLA silk
- PETG transparent