1 / 1
Diamond shaped small watering can
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A small watering can in shape of a diamond.
- Rating
- 5 / 5
- Likes
- 25
- Downloads
- 175
- Makes
- 8
- Views
- 605
- Reviews
- 7
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a small watering can (you can scale it up if you want) in shape of a diamond. Approx. size is 14 cm x 7.4 cm x 6 cm.
Upon some reports that the can leaks for some, I've added a version with 1.5mm thick wall and 10mm spout orifice.
Print Settings
Material: PLA
Layer height: 0.2 mm
Perimeters: 4
Top & bottom layers: 5 (to make it watertight)
Infill: 100% (to make it water tight)
Seams: rear
Supports: no need if you have good cooling (all angles are max 45°)