1 / 3
Watertight Enclosure Clamps
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
The Enclosure Clamp clamps around a 3″ or 4″ Watertight Enclosure for easy mounting on your vehicle.
- Rating
- 5 / 5
- Likes
- 6
- Downloads
- 111
- Makes
- 0
- Views
- 503
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
These clamps, which can be used for 3″ or 4″ Enclosures like the Watertight Enclosures, provide a simple and easy mounting solution. The eight threaded M4 mounting holes allow the watertight enclosure to be mounted flush to the structure of your vehicle, or on a Payload Skid for your BlueROV2.
*Please note: The thickness and threaded holes are designed for aluminum, so may need modifications when 3D printing.
3D print does not include the following:
- 2 x Thin Adhesive Rubber Strips (1.59 mm)
- 2 x Thick Adhesive Rubber Strips (3.18 mm)
- 4 x M3x12 Socket Head Cap Clamp Screws
- 4 x M4x14 Socket Head Cap Mounting Screws