KA-BAR Bed Scraping Tool
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.15 – €1.40 net (excluding VAT)
For file: KA-BAR_Scraper_Right_0.2mm_PLA_MK3S_1h8m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.28 excluding VAT (range midpoint).
- Weight reported by the author
- 19 g
- Print time reported by the author
- 1.13 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Bed scraping tool designed to look like the famous KA-BAR knife
- Rating
- 0 / 5
- Likes
- 38
- Downloads
- 115
- Makes
- 0
- Views
- 579
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I made this goofy KA-BAR knife design, but I like practical prints. So I figured I'd put bed scraper on the end of it. Full Tang construction. It fits with a bit of friction but I recommend CV glue. I printed everything with 6 top and bottom layers and 3 parameters. For the blade I recommend 60% infill. You want it pretty ridged for sticky prints. The handle can be less like 10-15% but I recommend aligning the seems. I posted my sliced files for the MK3s+. Post your makes. Use wild colors. Happy Printing.
I printed the blade and handle using Fremover PLA+ and Inland PLA Pro respectively. I designed it for a easy fit. If you have issue just use a steel knife blade and scrap perpendicularly against the four corners of the pla blade's tang. Shave off a bit and try fitting again. This did the trick for me.
If you like the KA-BAR see the below link for a Toy/Toothpaste squeezer I also made.
https://www.printables.com/model/394558-ka-bar-toy-knife-and-toothpaste-squeezer-squeegee
Updated handle files