Sturdy base for SUNLU S2 Filament Dryer Box
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€2.36 – €2.88 net (excluding VAT)
For file: base_flat-b_230213_0.3mm_PLA_MK3S_2h2m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €2.62 excluding VAT (range midpoint).
- Weight reported by the author
- 45 g
- Print time reported by the author
- 2.03 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
The SUNLU S2 Filament Dryer Box is top heavy. This base holds the dry box in place & keeps it from tipping over easily.
- Rating
- 4.833 / 5
- Likes
- 105
- Downloads
- 523
- Makes
- 6
- Views
- 2,698
- Reviews
- 6
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial
The Sunlu S2 is great, except the fact it's base is not very wide and the whole thing tips over a lot. At least mine used to. The 2 piece base screws together and clamps onto the dryer box.
You'll need 1 M5x30 screw & 1 M5 nut
Insert the nut from the bottom. Assemble the B part. Start the screw, but don't tighten. Turn it over and place the dryer on top. Tighten the screw.
It may still be a little loose, but it won't come out or allow the dryer to tip over easily.