Fusion3 F410 Circular Fan Duct
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An upgraded fan duct for the Fusion3 F410 to improve part cooling performance. May work on other E3D Volcano Printers.
- Rating
- 5 / 5
- Likes
- 8
- Downloads
- 201
- Makes
- 2
- Views
- 821
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
A fan duct I designed for the Fusion3 F410 due to the stock shroud having poor part cooling performance on the right side of the hotend. Replaces the stock fan shroud and heatsink fan, so may work on other printers with an E3D volcano as well, but I've not tested that.
Uses the stock heatsink fan and 5015 blower, you might need to use some force to separate the stock blower from the shroud, since for me it was glued in. The blower has a friction fit, but even printing fast with aggressive jerk and acceleration it hasn't so much as moved.
Print this from ABS to allow for enough flex for it to clip on, and for heat resistance. PLA worked fine for printing Nylon and PLA, but ABS caused it to warp almost immediately. Also, I had to modify the homing gcode so that it would go 5mm further in on X and Y for the front right corner to prevent the corner from hitting the shroud.
Print with supports under the heatsink clip, no other supports should be required however.