Quick Print Daisy
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This is a quick print flower that prints flat and then bends into place forming petals.
- Rating
- 4 / 5
- Likes
- 20
- Downloads
- 118
- Makes
- 2
- Views
- 679
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
Printing:
This model was dialed in using 0.2mm layer height, petg, and 0.6mm nozzle, but should be go using 0.2mm layer height in other common materials and 0.6mm nozzle and smaller.
Both parts can be printed together or separately, but they must be printed with the middle cup areas facing up.
Assembly:
To assemble the flower each arm bends inward and slides into the next slot clockwise. There is a little hook at the end which help hold them in place, but to slot in the arm needs to be bent slightly more to fit in the slot, then should catch and hold.
The cap just pops into place.