Prusa Slicer Fuzzy Settings Visualization.
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€1.23 – €1.51 net (excluding VAT)
For file: Fuzzy Settings_1h42m_0.20mm_205C_PLA_ENDER3V2NEO.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.37 excluding VAT (range midpoint).
- Weight reported by the author
- 10 g
- Print time reported by the author
- 1.71 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A simple guide to understand how adjusting the fuzzy parameters effects the printing method.
- Rating
- 5 / 5
- Likes
- 20
- Downloads
- 145
- Makes
- 1
- Views
- 3,472
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Test Models
- License
- Creative Commons — Attribution
I've been experimenting with Prusa Slicers' Fuzzy Skin setting. I wanted to better visualize how adjusting thickness vs point distance affects the look and feel of the print.
I chose domes displaying the fuzzy setting, with a partial part left with the standard smooth setting, to show the contrast.
There is one dome, with a hole. that was made to identify the default fuzzy skin setting.
It was printed with .2 layering.. I may run a print and take pictures with smaller layering. If so, I'll add the pictures and G-code to this model.
This was mainly a personal project, but thought I'd share it just in case anyone else was wanted to see the results in my screenshots, or if they wanted to download and print for their own use.
I manually changed the filament at the 25(ish) minute mark to make the words more visible. If inspired, I may edit the G-code to PAUSE at that moment.
Please consider downloading if you found it useful as that helps with analytics and doesn't cost you anything
Let me know if you have any questions or comments.