1 / 2
Bird Window Feeder / Bath
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This bird feeder / bath was designed to be stuck to a window using Nano tape.
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 109
- Makes
- 1
- Views
- 781
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial
This bird feeder / bath was designed to be stuck to a window using Nano tape.
Print Settings
Rafts:
No
Supports:
No
Resolution:
.3
Infill:
25
Filament:
Whatever you like PETG / ASA or reflective PLA might work
Notes:
Designed to print without support. Should use a decent infill amount to ensure the stand pegs are strong enough, or perhaps just use 3 walls.
Keep in mind, if printed in PLA, it will likely melt in the sun, especially if it's dark PLA, or painted to look like wood like I did with mine :) Maybe printing in white PLA would be ok, but try at your own risk. ASA or PETG would be better.Category: Outdoor & Garden