1 / 7
FreeBSD deamon logo model
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Everyone loves the FreeBSD deamon logo's model.
- Rating
- 4.667 / 5
- Likes
- 9
- Downloads
- 102
- Makes
- 4
- Views
- 562
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Everyone loves the FreeBSD deamon logo.
Everyone uses Linux, but you really love FreeBSD, don't you?
This model is a three-dimensional model of the FreeBSD deamon logo.
Always keep FreeBSD in mind.
Print with support and glue together. A display stand is also available.
If 100mm diameter is too large, 50mm is also available.
Print Settings:
- Material: PLA, PETG. whatever.
- Layer height: 0.2mm or less than
- Supports: Support on build plate only
Models:
- There are two sized models: 100mm and 50mm diameters.
- There are two types of joints: horizontal(upper and lower) and vertical(front and back).
Typical amount of filament and printing time:
- It uses 21g filament and can be printed in 2h19m.